Forecast Interiors — Journal Choosing Fabric for a Commercial Space: How to Read Contract Textile Ratings
Flammability tests, double rubs and colorfastness grades explained through the Association for Contract Textiles guidelines, so you can choose fabric for a restaurant, office or salon with confidence.
A fabric that looks right as a sample can wear very differently on a restaurant banquette or a waiting-room chair. Commercial interiors ask more of upholstery and window fabrics, and the industry has a common language for describing that performance: the Voluntary Performance Guidelines published by the Association for Contract Textiles (ACT), a trade association of companies involved in textiles for commercial environments.
Here is how to read them, decision by decision.
First, know what the fabric is and where it goes
ACT's guidelines depend on three things: how the fabric is made (woven, coated or knit), what it will be used for (upholstery, direct glue wallcoverings and adhered panels, wrapped panels and upholstered walls, or drapery), and whether it will be used indoors or outdoors. The fabric supplier sets the application and use. So the first question for any commercial fabric is simple: what is it rated for? A beautiful drapery fabric is not automatically suitable for a dining chair.
Flammability: match the test to the use
ACT points to different flammability tests depending on the end use. For indoor woven fabrics, the guidelines list:
- Upholstery: California Technical Bulletin 117-2013, Section 1, pass.
- Direct glue wallcoverings and adhered panels: ASTM E84 (adhered mounting method), Class A or Class 1.
- Wrapped wall panels and upholstered walls: ASTM E84 (unadhered mounting method), Class A or Class 1.
- Drapery: NFPA 701, Method 1 or 2 as appropriate, pass.
ACT is clear that its guidelines are minimum requirements and may not reflect the requirements or laws in every location, and that specifiers should seek professional advice on whether a product complies with applicable laws. For a commercial space, the local codes that apply to your building are the final word.
Abrasion: enough is enough
ACT notes that designers and end-users increasingly ask for higher abrasion numbers. Its guideline for woven and knit upholstery is:
- Low traffic or private spaces: 15,000 double rubs (Wyzenbeek) or 20,000 cycles (Martindale).
- High traffic or public spaces: 30,000 double rubs (Wyzenbeek) or 40,000 cycles (Martindale).
Coated fabrics have a high-traffic guideline of 50,000 double rubs Wyzenbeek.
Yet ACT states that results exceeding its high-traffic guideline "have not been shown to be an indicator of increased fabric lifespan," and that a fabric with twice the abrasion cycles does not have double the service life. Its studies found results on the same fabric can vary by at least 60 percent from test to test, and that there is no correlation between Wyzenbeek and Martindale results. When ACT surveyed its members about field failures, the more likely causes were inappropriate cleaning, lack of proper maintenance, physical abuse and inappropriate application.
The practical decision: confirm the fabric meets the right traffic level, then spend your attention on how it will be cleaned and used.
Color, crocking and strength
Three more are worth a glance on any specification sheet:
- Colorfastness to light: for indoor woven upholstery, Grade 4 minimum at 40 hours; for drapery, Grade 4 minimum at 60 hours. ACT notes there is no direct correlation between test hours and hours of service.
- Crocking (dye rubbing off onto another surface): for indoor woven upholstery, dry crocking Grade 4 minimum and wet crocking Grade 3 minimum.
- Physical properties: for indoor woven upholstery, pilling Class 3 minimum; breaking strength 50 lbs. minimum and seam slippage 25 lbs. minimum, both in warp and weft.
Coated fabrics and stain finishes
If you are considering polyurethane coated upholstery, ask about hydrolysis resistance. ACT explains that polyurethane coated fabrics can be vulnerable to humidity and heat, including body heat, and that failure can show as cracking, flaking or delamination. ACT recommends the ISO 1419 test with a five-week minimum. It also notes that improper or excessive exposure to cleaners, sanitizers and disinfectants can cause similar damage, so check a fabric's compatibility with the products your staff will actually use.
Stain repellent finishes help, but ACT notes they do not "bulletproof" a fabric, and stains should still be cleaned as recommended. ACT also tracks state bans on textiles containing PFAS chemicals, long used in stain repellents, so it is worth asking what a finish contains.
What it means for a business in Lexington
Whether you are refreshing a restaurant, an office reception or a salon (more on commercial interiors), a few questions go a long way: what the fabric is rated for, whether it meets the flammability test for that use, whether it meets the right traffic level, and how it should be cleaned. Pair those answers with the requirements that apply to your building and you can choose something lovely that is also built for the work.
If you are planning a commercial project and would like help weighing the options, get in touch.